非柔性连接石化储罐配管温差应力分析与对策

储罐配管在温差作用下产生热位移会导致管壁产生热应力，未采用柔性连接的配管由于热应力集中作用可能发生破漏。针对与石油化工储罐非柔性连接的配管的安全问题，应用ANSYS有限元分析软件模拟计算石化企业典型配管的热应力分布；根据不同类型配管的分析结果，提出了工程技术与管理方面的针对性安全措施。研究结果表明:温差效应对石化储罐配管热应力影响显著，随内外温差的增加，配管应力集中的区域增大，最大热应力值增大；补偿措施能够改善配管的柔性，降低配管应力；约束载荷限制配管热膨胀从而增大配管应力；三通管是多根配管接合的区域，这种复杂管道交汇处会形成明显应力集中。研究结果对于提高石油化工非柔性连接配管安全性有一定的指导意义。     

Mitigating Impact of Devils Lake Flooding on the Sheyenne River Sulfate Concentration

Devils Lake is a terminal lake located in northeast North Dakota. Because of its glacial origin and accumulated salts from evaporation, the lake has a high concentration of sulfate compared to the surrounding water bodies. From 1993 to 2011, Devils Lake water levels rose by ~10 m, which flooded surrounding communities and increased the chance of an overspill to the Sheyenne River. To control the flooding, the State of North Dakota constructed two outlets to pump the lake water to the river. However, the pumped water has raised concerns about of water quality degradation and potential flooding risk of the Sheyenne River. To investigate these perceived impacts, a Soil and Water Assessment Tool (SWAT) model was developed for the Sheyenne River and it was linked to a coupled SWAT and CE‐QUAL‐W2 model that was developed for Devils Lake in a previous study. While the current outlet schedule has attempted to maintain the total river discharge within the confines of a two‐year flood (36 m³/s), our simulation from 2012 to 2018 revealed that the diversion increased the Sheyenne River sulfate concentration from an average of 125 to >750 mg/L. Furthermore, a conceptual optimization model was developed with a goal of better preserving the water quality of the Sheyenne River while effectively mitigating the flooding of Devils Lake. The optimal solution provides a “win–win” outlet management that maintains the efficiency of the outlets while reducing the Sheyenne River sulfate concentration to ≤600 mg/L.     

Ionic imbalance due to hydrogen carbonate from Asian dust

In an attempt to identify the ionic imbalance, hydrogen carbonate, HCO₃⁻ (bicarbonate), was determined together with the commonly determined nine major ions because the imbalance was frequently encountered in the chemical analysis of samples with high pHs. Titration method was applied for the determination of the samples with pH higher than 5.6. These samples amounted to 102 of the 1536 samples collected in Hokkaido, Northern Japan, from April 1998 to December 2002. Of the 102 samples, 74 (Group A) showed an acceptable ion balance without including HCO₃⁻. In the other 28 (Group B), however, inclusion of HCO₃⁻ successfully improved the ion balance. These results suggested that hydrogen carbonate was a potential candidate for explaining the imbalance. The hydrogen carbonate concentrations showed a strong correlation with the corresponding non-sea salt calcium (nss-Ca²⁺) concentrations, which implied that hydrogen carbonate was derived from calcium carbonate particles incorporated into falling raindrops or cloud droplets. For Group A, the relationship between hydrogen carbonate and the nss-calcium ion concentration was very similar to that for commonly suspended particles in Hokkaido. On the other hand, Group B exhibited a stronger but significantly different correlation. To the samples of Group B, a back-trajectory analysis was applied to demonstrate that the samples were associated with aerosol travelling from Northern China or Mongolia, which indicated that alkaline aerosol affected the chemistry. In consideration of these findings, the current standard of the ion balance should be critically reviewed for modification in regard to the contribution of hydrogen carbonate not only in source areas but also in receptor areas of alkaline aerosol.     

乌鲁木齐市大气气溶胶研究的分析

全面论述了大气气溶胶对环境造成的影响、乌鲁木齐市大气气溶胶的研究现状以及国内外的研究现状，并且对乌鲁木齐市大气气溶胶的进一步研究提出了设想。     

Effects of calibration on L-THIA GIS runoff and pollutant estimation

Urbanization can result in alteration of a watershed's hydrologic response and water quality. To simulate hydrologic and water quality impacts of land use changes, the Long-Term Hydrologic Impact Assessment (L-THIA) system has been used. The L-THIA system estimates pollutant loading based on direct runoff quantity and land use based pollutant coefficients. The accurate estimation of direct runoff is important in assessing water quality impacts of land use changes. An automated program was developed to calibrate the L-THIA model using the millions of curve number (CN) combinations associated with land uses and hydrologic soil groups. L-THIA calibration for the Little Eagle Creek (LEC) watershed near Indianapolis, Indiana was performed using land use data for 1991 and daily rainfall data for six months of 1991 (January 1-June 30) to minimize errors associated with use of different temporal land use data and rainfall data. For the calibration period, the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The calibrated CN values were used for validation of the model for the same year (July 1-December 31), and the Nash-Sutcliffe coefficient was 0.60 for estimated and observed direct runoff. The Nash-Sutcliffe coefficient was 0.52 for January 1, 1991 to December 31, 1991 using uncalibrated CN values. As shown in this study, the use of better input parameters for the L-THIA model can improve accuracy. The effects on direct runoff and pollutant estimation of the calibrated CN values in the L-THIA model were investigated for the LEC. Following calibration, the estimated average annual direct runoff for the LEC watershed increased by 34%, total nitrogen by 24%, total phosphorus by 22%, and total lead by 43%. This study demonstrates that the L-THIA model should be calibrated and validated prior to application in a particular watershed to more accurately assess the effects of land use changes on hydrology and water quality.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

不同低碳氮比废水中好氧颗粒污泥的长期运行稳定性

为了研究好氧颗粒污泥系统处理低碳氮比废水的长期运行稳定性,采用低碳氮比（C/N）条件下逐步增加碳氮负荷的进水方法,分别在反应器A和B中接种好氧颗粒污泥,考察其长期运行过程中的理化性质、处理性能及应对冲击负荷的稳定性.其中A反应器的碳氮比一直维持在2,而B则由4逐步降至2.结果表明,在4℃存储30d的好氧颗粒污泥,经过25d的培养,其活性基本恢复,A、B反应器化学需氧量（COD）和氨氮（NH₄⁺-N）的去除效率均达到90%以上.在其后的稳定阶段,B反应器COD和NH₄⁺-N去除率达到90%以上,实现了完全硝化;而A反应器COD去除率仅80%左右,虽然NH₄⁺-N去除率最终也达到90%以上,但仅实现短程硝化.在冲击负荷阶段,A和B反应器COD去除率仍维持在80%以上,但是NH₄⁺-N去除受到很大冲击.A反应器NH₄⁺-N去除效率恶化,B反应器仅实现了部分硝化.整个运行过程,好氧颗粒污泥的物理性质受到的影响不大,A和B反应器的污泥容积指数（SVI₃₀）分别维持在60 mL ·g^-1和75 mL ·g^-1左右,混合液悬浮固体（MLSS）在5g ·L^-1和3.7g ·L^-1左右.颗粒污泥微生物群落分析表明,B反应器相对于A反应器丰富度和多样性更高.同时B反应器具有更高丰度的Zoogloea属,在颗粒中能产生更多的胞外蛋白促使颗粒结构更稳定,保证系统的长期稳定运行.以上结果表明,与C/N为2的好氧颗粒污泥系统相比,C/N为4的系统脱碳硝化效果好,抗冲击负荷能力强,更有利于颗粒污泥的长期稳定运行.     

基于OMI数据的东南沿海大气臭氧浓度时空分布特征研究

基于臭氧监测仪(OMI)卫星反演数据,对2005—2018年东南沿海5省区域大气臭氧柱浓度数据进行提取及分析,探讨其时空分布格局及影响因素.结果表明:①在时间变化上,14年间,该区域大气臭氧柱浓度整体呈先上升后下降的趋势,2005—2013年臭氧柱浓度持续升高,最高值为324.52 DU,高值区不断向南部区域扩大;2013—2018年臭氧柱浓度呈下降趋势,最低值为228.27 DU,但在2017、2018年略有上升.②在空间分布上,臭氧柱浓度自北向南逐渐降低,高值区集中分布在江苏及浙江省北部;低值区集中于福建省南部及广东省大部分地区.③在季节变化上,大体呈现出春夏季高于秋冬季,高值区在春夏季交替出现,秋季略高于冬季,但差异不明显.④稳定性分析表明:研究区臭氧柱浓度整体呈现中部分散、南北部集聚、差异较显著的分布格局.⑤自然因素中,风向、气温均呈现显著正相关,江淮地区的梅雨季节(降水)及华南地区的台风和暴雨也起到显著作用.⑥人文因素中,臭氧柱浓度与地区生产总值、各产业生产总值及机动车保有量均表现出正相关,其中,臭氧柱浓度与第二产业的相关度最高.另外,臭氧柱浓度与NO_x排放量表现出显著相关性.VOC_s对臭氧柱浓度的影响中,工业源是主控因素,交通源和居民源次之,电厂源对臭氧柱浓度的影响最弱.这进一步说明臭氧浓度的变化受到了诸多因素的综合影响,但气温、NO_x及VOC_s的排放是臭氧浓度变化的主导因素.     

基于卫星遥感气溶胶产品评估体系的气溶胶时空分布及变化趋势表征

卫星遥感气溶胶虽然空间覆盖度高,但不同产品数据在准确性和适用性上存在显著差异.为了能够科学定量的衡量各个产品的优劣,选择最合适的气溶胶产品,该研究以数学统计为基础,提出了一种卫星遥感气溶胶产品评估体系,并依此确定了全球6个人口密集地区的最优卫星数据集,在此基础上开展了近10年的（2009—2018）气溶胶时空变化分析.结果表明暗像元算法在植被覆盖度高的地区表现最好,深蓝算法在亮地表的沙漠干旱地区更占优势,而暗像元-深蓝融合算法在土地类型复杂且气溶胶来源多变时得以突出.人口密集的6个区域中,除了区域A和区域B,其它地区的大气污染水平整体偏高.其中,A、B、E的气溶胶负荷呈下降变化,区域F基本不变,其余区域上升变化.评估体系的建立为气溶胶遥感产品的选取提供了新的衡量方法,且该文关于气溶胶时空分布及变化的分析可以为区域性气溶胶研究提供一定的参考价值.     

成都市大气颗粒物粒径分布及其对能见度的影响

使用环境颗粒物分析仪（GRIMM180）对成都市2018年10月—2019年9月0.25~32 μm的大气颗粒物数浓度粒径分布进行观测,结合细颗粒物（PM_2.5）质量浓度以及相对湿度（RH）、能见度、降水量等气象要素数据,分析了成都市大气颗粒物粒径分布及其与能见度的关系.结果表明,观测期间成都市大气颗粒物以细粒子为主,0.25~0.5 μm的粒子数浓度占总数浓度的97.75%,数浓度谱呈单峰分布,2018年秋季、2019年夏季表面积谱呈双峰分布,2018年冬季、2019年春季表面积谱呈三峰,体积谱均为三峰分布;在不同RH区间,PM_2.5质量浓度及数浓度均与能见度呈负相关,且其中0.25~0.5 μm粒径段的细颗粒物因为对可见光波段的米散射效应而对能见度产生较大影响;在不同RH情况下,不同粒径段颗粒物数浓度对能见度的影响程度有所差别：在低RH（<70%）下,0.25~0.3 μm粒径段粒子数浓度对能见度影响最大;在中等RH（70%~80%）下,0.3~0.5 μm粒径段粒子数浓度对能见度的影响最大;而在高RH（>80%）下,0.3~0.5 μm和0.5~1 μm粒径段粒子数浓度对能见度影响相当.